A complete set of repair workshop floor is made up of main mat, male edge, female edge and corner. The mat size is 400mm*400mm*18mm, thickness is 18mm, The edge size is 400mm*60mm*8mm. Corner is fan shaped structure, size is 60mm*60mm*18mm. Repair workshop floor is lightweight and removable, easy to install. No tools needed, you can fast construct the sturdy display ground by a simple interlocking interface design.Repair workshop floor with compact structure is lightweight, easy to transport and store up. It can be used widely to auto 4s shop exhibition floor, auto beauty shop floor, auto foil workshop and customer lounge, etc. Also it can be applied to ground installation of exhibition and other temporary places, etc. It is especially suitable for use in repair shop floor maintenance upgrade.
The traditional workshops usually use epoxy resin paint. Due to the workshop oil immersion and penetration, the heavy impact in production process , the vehicle rolling back and forth, epoxy floor paint is generally used for two or three years. Then it will be peeling. When finding the ground problems and rectification, the needs of normal production, workshop equipment has been installed, the ground foundation has been damaged, oil has been the underlying reasons, the ground upgrade will be very difficult. Some workshops use tiles or marble as ground material, found a corner of tile or marble is often broken after laying, want to upgrade and can’t make local treatment, only could be done.
Aiming at the auto repair shop, beauty shop, auto maintenance and repair factory, repair workshop floor is becoming a new choice to upgrade the ground. Just below the repair workshop floor there are hundreds of support points, can withstand the vehicle rolling back and forth. They are quick and convenient installation, easy cleaning, have low ground requirements, particularly suitable for use in the laying of the garage floor, can also be used as a temporary exhibition booth. Repair workshop floor production uses 100% pure PP material, it is non-toxic, tasteless, environmental protection and recyclable use, can also be used for the gym, office of the commercial area of the ground.
Repair workshop floor has low ground and construction environment requirements. If vertical drop is no more than 10 mm in one square meter, our repair workshop floor can be constructed directly. The product is DIY mode, no professional construction team needed. Through the connection between the lock and the lock with the collocation of different colors of the floor, our products can make the floor achieve the most wonderful effect. The workshop ground no need to wait after construction , you can immediately use and cars can pass.
Lock of repair workshop floor is strengthening design, buckled firmly and reliably, corner and edge will ensure the overall laying to achieve the perfect effect.
Repair workshop floor has the following advantages:
1. can be buckled with the multifunction modular floor mat, realize the separation of dry and wet ground;
2. Laying simple, easy to clean
3. excellent load bearing capacity, suitable for high traffic and car through the place;
4. expressive appearance, suitable for International Exhibition and event location.
5.beautiful style, good design, excellent practicability of indoor and outdoor laying.